=== Upmpdcli general parameters [[friendlyname]] friendlyname:: "Friendly Name" for the UPnP Media Renderer. This will be displayed by most Control Points to identify the Renderer. Some OpenHome Control Points may display the 'ohproductroom' value instead. [[upnpav]] upnpav:: Enable UPnP AV services (0/1). This is set by default, but it may useful to switch it off with some OpenHome Control Points which are too easily confused by the presence of UPnP AV services. [[openhome]] openhome:: Enable OpenHome services (0/1). This defaults to 1, as OpenHome queuing is superior for most usages. There should be little reason to turn it off. [[logfilename]] logfilename:: Log file name. Defaults to stderr. This can also be specified as -d logfilename. [[loglevel]] loglevel:: Log level. Can also be specified as -l loglevel. [[checkcontentformat]] checkcontentformat:: Check that input format is supported. Extract the protocolinfo information from the input metadata and check it against our supported formats. Set this option to 0 if a control point or media server sends good audio data with bad metadata. [[iconpath]] iconpath:: Path to the Renderer icon. The image will be displayed by Control Points which support it. The UPnP protocol has provisions for a renderer to send the URL to a descriptive icon as part of the device description. Due to current (and probably permanent) *upmpdcli* limitations, the image file *must* be a 64x64 32 bits-per-pixel png file. Default: '$pkgdatadir/icon.png'. The icon will only be read once, when upmpdcli starts up. [[pkgdatadir]] pkgdatadir:: XML and other constant data storage directory. Default: '$prefix/share/upmpcli' (e.g.: '/usr/share/upmpdcli'). [[cachedir]] cachedir:: Directory used to store cached data Only used for the OpenHome queue metadata for now. The default value is ~/.cache/upmpdcli for normal users or /var/cache/upmpdcli when upmpdcli is started as root. [[presentationhtml]] presentationhtml:: Path to the presentation HTML document You can change it to replace the default presentation page. The page will only be read once, when upmpdcli starts up. It can't presently be used for status updates (but I guess that you could put a redirect in there, to something more dynamic served by a real HTTP server). Default: '$pkgdatadir/presentation.html'. [[pidfile]] pidfile:: Name of lock file used to store the current process pid. Only used if the process is launched by user root. Used by the init system, and to avoid multiple instances. The only reason to change the value is if you actually want to have several instances running (also change cachedir in this case). === Tidal streaming service parameters [[tidaluser]] tidaluser:: Tidal user name. Your Tidal login name. [[tidalpass]] tidalpass:: Tidal password. The password for your Tidal account. [[tidalquality]] tidalquality:: Tidal stream quality. 'low' and 'high' are aac streams. 'lossless' is FLAC and will only work if your subscription allows it. === Qobuz streaming service parameters [[qobuzuser]] qobuzuser:: Qobuz user name. Your Qobuz login name. [[qobuzpass]] qobuzpass:: Qobuz password. The password for your Qobuz account. [[qobuzformatid]] qobuzformatid:: Qobuz stream quality. 5 for mp3/320, 7 for FLAC if your subscription allows it. === Google Music streaming service parameters [[gmusicuser]] gmusicuser:: Google Music user name. Your Google Music login name (probably a gmail address). [[gmusicpass]] gmusicpass:: Google Music password. The password for your Google Music account. [[gmusicquality]] gmusicquality:: Google Music stream quality. 'hi' for mp3/320, 'med' for mp3/160, 'low' for mp3/128. [[gmusicdeviceid]] gmusicdeviceid:: Google Music device id. Your system MAC address will be used by default, but this will count against the maximum count of registered devices for this account. You can set the gmusicdeviceid value to the device ID from a phone or tablet on which you also use Google Play Music. === Local Media Server parameters [[uprcluser]] uprcluser:: Bogus user name variable. Used for consistency with other Media Server plugins to decide if the service should be started (so, do set it if you want a Media Server). [[uprclmediadirs]] uprclmediadirs:: Media directories This is a space-separated list of directories to explore for music files. This is used directly as the recoll "topdirs" value, so you can use double-quote quoting for paths with embedded spaces. [[uprclhostport]] uprclhostport:: HTTP host and ports for serving media files The Media Server HTTP server will run on this address and port, which will also be inserted on the URLs we produce. If the variable is not set, we will use port 9090 and the first non-loopback ipv4 address in "ip addr" output, which may be right or not. Example: 192.168.1.1:9090 [[uprclpaths]] uprclpaths:: This is used to translate real path to ones relative to the HTTP server doc tree. It also performs a form of access control. If this is not set, uprcl will use a null translation for each of the uprclmediadirs entries. [[uprclconfdir]] uprclconfdir:: Recoll index directory This is usually not defined and defaults to /var/cache/upmpdcli/uprcl [[uprclautostart]] uprclautostart:: Initialize uprcl as soon as upmpdcli starts This is useful because uprcl initialization can take quite some time so it is better not to wait for the first access. The general default is false for the autostart variables, so this is normally explicitely set to true. === MPD parameters [[mpdhost]] mpdhost:: Host MPD runs on. Defaults to localhost. This can also be specified as -h host [[mpdport]] mpdport:: IP port used by MPD Can also be specified as -p port. Defaults to the normal MPD port, 6600 [[mpdpassword]] mpdpassword:: MPD password. Password for connecting to MPD (only necessary if password access is enabled in the MPD configuration file). [[ownqueue]] ownqueue:: Set if we own the MPD queue. If this is set (on by default), we own the MPD queue and will fearlessly clear it. Can also be specified as -q 0|1. === UPnP network parameters [[upnpiface]] upnpiface:: Network interface to use for UPnP. libupnp/pupnp only supports communicating on a single interface and will use the first found, this allows forcing the use of another interface. [[upnpip]] upnpip:: IP address to use for UPnP, alternative to using an interface name. [[upnpport]] upnpport:: Port number used for UPnP. libupnp/pupnp defaults to using the first free port after 49152. Note that clients do not need to know about the value, which is automatically discovered. === Audio control hooks [[onstart]] onstart:: Command to run when playback is about to begin. Specify the full path to the program, e.g. /usr/bin/logger. [[onplay]] onplay:: Command to run when MPD state switches to "PLAY". Specify the full path to the program, e.g. /usr/bin/logger. [[onpause]] onpause:: Command to run when MPD state switches to "PAUSE". Specify the full path to the program, e.g. /usr/bin/logger. [[onstop]] onstop:: Command to run when MPD state switches to "STOP". Specify the full path to the program, e.g. /usr/bin/logger. [[externalvolumecontrol]] externalvolumecontrol:: Use external command to manage the the sound volume (0/1). This is used in the case where MPD is unable to control the volume, but some other command can, for example if you have an external amp on which it is possible to set and read the volume through scripts. If set, the calls to MPD to set and read the volume will be replaced by executions of 'onvolumechange' and 'getexternalvolume' [[getexternalvolume]] getexternalvolume:: Command to run for reading the sound volume. The command should write a 0-100 numeric value to stdout. [[onvolumechange]] onvolumechange:: Command to run to set the volume. Used when 'externalvolumecontrol' is set. Specify the full path to the program, which is called with the volume as the first argument, e.g. /some/script 85. === OpenHome parameters [[ohproductroom]] ohproductroom:: The name of the room where the Product is located. Set to “Main Room” by default, displayed in place of the "friendly name" by some control points. ProductRoom is used to group the Product with other related Products in the same physical room (e.g. a source with a pre-amp). Products which are physically linked must always share the same ProductRoom name. [[radiolist]] radiolist:: Path to an external file with radio definitions. Radio stations can be defined at the end of the the main file, or in an external file (or both). Using an external file can ease distribution to multiple machines. Either way, each radio station is defined as a section with a name beginning with 'radio', containing a mandatory URL parameter, and optional values. The part of the name after 'radio' will be the displayed radio name (as album title). - artUrl: an optional static radio icon URL. - artScript: an optional script to retrieve an image for the current title - metaScript: an optional script to retrieve metadata for the current title. See the xref:radio-definitions[section about radio station definitions] for details about the scripts. Example: ---- [radio My Radio] url = http://some.host/some/path.pls artUrl = http://some.host/icon/path.png artScript = /path/to/script/dynamic-art-getter metaScript = /path/to/script/metadata-getter ---- [[ohmanufacturername]] ohmanufacturername:: Manufacturer name. [[ohmanufacturerinfo]] ohmanufacturerinfo:: Manufacturer information. [[ohmanufacturerurl]] ohmanufacturerurl:: URL for manufacturer web site. [[ohmanufacturerimageuri]] ohmanufacturerimageuri:: Uri for manufacturer’s logo. [[ohmodelname]] ohmodelname:: Model name. [[ohmodelinfo]] ohmodelinfo:: Model information. [[ohmodelurl]] ohmodelurl:: URL for model web site. [[ohmodelimageuri]] ohmodelimageuri:: Uri for model’s icon. [[ohproductname]] ohproductname:: User-visible product name. By default this is set to ModelName. [[ohproductinfo]] ohproductinfo:: Product information. [[ohproducturl]] ohproducturl:: URL for product web site. This may be the UPnP presentation page. [[ohproductimageuri]] ohproductimageuri:: Uri for product image. [[ohmetapersist]] ohmetapersist:: Save queue metadata to disk (0/1). This allows persistence of the metadata information across restarts, the default is 1, and there is no reason to turn it off. [[ohmetasleep]] ohmetasleep:: Mimimum interval (Seconds) between two cache saves. Increasing this may improve playlist load speed on a slow device. The default is to start a new save as soon as the previous one is done (if the list changed again inbetween). === Songcast Receiver parameters [[sclogfilename]] sclogfilename:: Log file name for sc2mpd (default stderr) The value *must not* be the same as the one used for upmpdcli (except if empty). [[scloglevel]] scloglevel:: Log verbosity for sc2mpd. [[scplaymethod]] scplaymethod:: sc2mpd play method (mpd/alsa). With this set as 'alsa', sc2mpd will send the audio directly to the sound driver, which is the only way to really avoid skips and control the synchronization in multi-room setups. *For 'alsa', make sure that user upmpdcli has permission to access the audio devices !* [[schttpport]] schttpport:: Port used by sc2mpd for MPD to connect to. Used only for scplaymethod=mpd. sc2mpd only accepts connections from localhost. [[scalsadevice]] scalsadevice:: Alsa device used by sc2mpd for playing audio. Only used for scplaymethod=alsa. Use 'aplay -L' to see the possible values. [[sccvttype]] sccvttype:: sc2mpd resampling method. Only used for scplaymethod=alsa. sc2mpd uses libsamplerate. The default method is SRC_SINC_FASTEST and a Rasberry Pi 1 is fast enough to use it. Possible values: SRC_SINC_BEST_QUALITY, SRC_SINC_MEDIUM_QUALITY, SRC_SINC_FASTEST, SRC_ZERO_ORDER_HOLD, SRC_LINEAR. See the libsamplerate documentation for descriptions. Anything above SRC_SINC_FASTEST needs a serious CPU. BEST_QUALITY uses approx 25% cpu on a core i7 4770T. Obviously too much, actually might not be sustainable (it's almost 100% of 1 cpu). MEDIUM_QUALITY is around 10% on the same machine, FASTEST is 4-5%. Given that this is measured for the full process, probably a couple % for the conversion in fact. [[sc2mpd]] sc2mpd:: Path to sc2mpd. Only useful if it is not in /usr/bin and the location is not in the $PATH for the init scripts. === Songcast Sender parameters [[scsenderpath]] scsenderpath:: Path to the script (scmakempdsender) which starts the auxiliary mpd and the sender process. Empty and searched in PATH by default. [[scstreamscaled]] scstreamscaled:: Decide if we scale the songcast stream. If set, MPD software volume control will be applied to the stream. True by default: using a Control Point to set the volume on the upmpdcli instance which started the Sender affects the volume for all Receivers. [[scsendermpdport]] scsendermpdport:: localhost port to be used by the auxiliary mpd. [[scripts_dir]] scripts_dir:: Location for the scripts used to set up additional external sources. See the Songcast Sender support documentation page.