#Generated by ResourceBundle Editor (http://eclipse-rbe.sourceforge.net)

R1000.description = A Model Element cannot abstract itself.
R1000.message     = An abstraction must not be defined from the ''{2}'' {3} to itself.

R1010.description = The top Partitions of an Activity must not have a Super-Partition.
R1010.message     = The ''{0}'' Partition is a top Partition but has Super-Partitions.

R1020.description = The source and the target of a Flow must be contained in the same StructuredActivityNode.
R1020.message     = The source (''{0}'') and the target (''{1}'') of ''{2}'' are not contained in the same StructuredActivityNode.

R1030.description = The source and the target of a Flow must be owned by the same Activity.
R1030.message     = The source (''{0}'') and the target (''{1}'') of ''{2}'' are not owned by the same Activity.

R1040.description = An Activity Parameter Node must be represented by a Behavior Parameter owned by the same Activity.
R1040.message     = The ''{0}'' Activity Parameter Node is not represented by a Behavior Parameter owned by the same Activity.

R1050.description = An Activity Parameter Node cannot have both incoming and outgoing edges.
R1050.message     = The ''{0}'' Activity Parameter Node has both incoming and outgoing edges.

R1060.description = Activity Parameter Nodes with no incoming flow and one or more outgoing flow must have a Behavior Parameter with "In" or "In/Out" parameter passing mode.
R1060.message     = The ''{0}'' Activity Parameter Node has outgoing flows but its Behavior Parameter has an "Out" parameter passing mode.

R1070.description = Activity Parameter Nodes with no outgoing flow and one or more incoming flow must have a Behavior Parameter with "Out" or "In/Out" parameter passing mode.
R1070.message     = The ''{0}'' Activity Parameter Node has incoming flows but its Behavior Parameter has an "In" parameter passing mode.

R1080.description = All Partitions of the same nesting level must represent Parts of the same Classifier.
R1080.message     = The Partition or Activity ''{0}'' has Partitions which represent Parts from different Classifiers.

R1090.description = If a Sub-Partition is non-external and represents a Classifier then the represented Classifier must be nested in the Classifier represented by its Super-Partition or be the extremity of a Composition with the latter.
R1090.message     = The Classifier ''{2}'', represented by the Sub-Partition ''{1}'' is not contained (via nesting or composition) in the Classifier represented by the Super-Partition ''{0}''.

R1100.description = If a Sub-Partition represents a Part nested in a Classifier then its Super-Partition must represent the Classifier or an instance of the latter.
R1100.message     = The owner ''{0}'' of the Part ''{1}'' represented by the Partition ''{2}'' is not referenced by the Super-Partition ''{3}''.

R1110.description = There must be one to one correspondence between: (A) the Pins of a Call Behavior Action, and (B) the In, Out, InOut or Return Behavior Parameters of the called Behaviour.
R1110.message     = There is no correct matching between the Pins of ''{0}'' and the In, Out, InOut or Return Parameters of ''{1}''.

R1130.description = The type and the maximum cardinality of a Call Action''s Pin must match the type and max multiplicity of the represented Parameter.
R1130.message     = The type or the maximum cardinality of ''{0}'' does not match the type and maximum multiplicity of ''{1}''.

R1140.description = There must be one to one correspondence between: (A) the Pins of a Call Operation Action, and (B) the In, Inout, Out and Return parameters of the called Operation.
R1140.message     = There is no correct matching between the Pins of ''{0}'' and the parameters of ''{1}''

R1150.description = The Call Operation Action or Send Signal Action has more than one target Pin.
R1150.message     = The Call Operation Action or Send Signal Action ''{0}'' has more than one input Pin with its ''Self''' value at true.

R1160.description = A target Pin can only be owned by Call Operation Actions and Send Signal Actions
R1160.message     = The Pin ''{0}'' is a target Pin (its ''Self''' value is set to true) and is not owned by a Call Operation Actions or a Send Signal Action.

R1170.description = The type of the target Pin must be the same as the type that owns the Operation.
R1170.message     = The Call Operation Action ''{0}'' has target Pins not typed by the called operation owner .

R1180.description = Control Flows may not have Object Nodes at either end, except for Object Nodes with control type.
R1180.message     = The ''{0}'' Control Flow has as its source or target an Object Node with ''Control type'' false.

R1190.description = The Decision-Merge Node is used both as a Decision node and as a Merge node at the same time.
R1190.message     = The ''{0}'' Decision-Merge Node has more than one incoming edge and more than one outgoing edge.

R1200.description = The edges coming into and out of a Decision Merge Node must be either all Object Flows or all Control Flows.
R1200.message     = The ''{0}'' Decision-Merge node has both Object flows and Control Flows.

R1230.description = Only Control Flows can have Initial Nodes as their source.
R1230.message     = The ''{0}'' Initial Node has outgoing Object Flows.

R1250.description = If a Fork/Join Node has an Object Flow in its incoming edges, it must have an Object Flow in its outgoing edges and vice versa. The same applies for Control Flows.
R1250.message     = There is an incoherence for the flows of the Fork/Join Node ''{0}''

R1280.description = Object Flows may not have Actions at both end.
R1280.message     = The ''{0}'' Object Flow has Actions as its source and target.

R1290.description = Object Nodes connected by an Object Flow, with optionally intervening control nodes, must have compatible types. In particular, the downstream Object Node type must be the same or a super type of the upstream Object Node type.
R1290.message     = The Object Flow ''{0}'' connect two Object Nodes and the downstream Object Node type is not the same nor a super type of the upstream Object Node type.

R1300.description = Object Nodes connected by an Object Flow, with optionally intervening control nodes, must have the same upper bounds.
R1300.message     = The Object Flow ''{0}'' connect two Object Nodes which have different upper bound values.

R1310.description = An edge with constant weight may not target an Object Node, or lead to an Object Node downstream with no intervening actions and with an upper bound less than the weight.
R1310.message     = The edge ''{0}'' has a constant weight higher than the upper bound of an Object Node it targets or leads to.

R1320.description = An Object Flow must not be simultaneously multi-cast and multi-receive.
R1320.message     = The ''{0}'' Object Flow is both multi-cast and multi-receive.

R1350.description = If an Object Node has a ''Selection behavior'', then the ''Ordering'' of the Object Node is ordered and vice versa.
R1350.message     = The ''{0}'' Object Node has a ''Selection behavior'' but is not ordered, or is ordered but does not have a selection behavior.

R1360.description = Input Pins may have outgoing edges only when both the following conditions are met: (1) they are on Actions that are Structured Nodes, and (2) these edges must target a Node contained by the Structured Node.
R1360.message     = There is an edge coming from an Input Pin ''{0}'' and either the Input Pin is not on a Structured Activity Node, or the target ''{1}'' of the flow is not in the same Structured Activity Node.

R1370.description = Output Pins may have incoming edges only when both the following conditions are met: (1) they are on Actions that are Structured Nodes, and (2) these edges must come from a node contained by the Structured Node.
R1370.message     = There is an edge targeting an Output Pin ''{1}'' and either the Output Pin is not on a Structured Activity Node, or the source ''{0}'' of the flow is not in the same Structured Activity Node.

R1380.description = There must be one to one correspondence between: (A) the Pins of a Send Signal Action, and (B) the attributes of the sent Signal.
R1380.message     = There is no correct matching between the Pins belonging to ''{0}'' and the attributes belonging to ''{1}''.

R1390.description = The max cardinality of an argument Pin must be the same as for the represented Attribute.
R1390.message     = The maximum cardinality of ''{0}'' does not match the type and maximum multiplicity of ''{1}''.

R1400.description = An Activity Parameter Node can only belong to an Activity.
R1400.message     = The ''{0}'' Activity Parameter Node belongs to an Activity Partition, a Structured Activity Node or a Conditional Clause.

R1410.description = Only one Association End of an Association can be aggregate or composite.
R1410.message     = The Association ''{0}'' has more than one Association End that is aggregate or composite.

R1420.description = Actors and UseCases can only have binary Associations.
R1420.message     = The Actor or UseCase ''{0}'' has an n-ary Association.

R1430.description = Multiplicities of an AssociationEnd must be consistent: MultiplicityMin cannot be '*' and MultiplicityMin must be inferior to MultiplicityMax.
R1430.message     = The AssociationEnd owned by ''{1}'' has inconsistent Multiplicity values.

R1440.description = AssociationEnds cannot be composite on n-ary Associations.
R1440.message     = The AssociationEnd ''{0}'' is a composite and belongs to a n-ary Association.

R1450.description = If an association is a composition, then the opposite maximum multiplicity must be 1.
R1450.message     = An AssociationEnd owned by ''{1}'' is a composition but its opposite end's maximum multiplicity is not 1.

R1460.description = A public association oriented from a public Classifier cannot be linked to a private or protected Classifier.
R1460.message     = The public Classifier ''{0}'' has an association oriented toward a private or protected Classifier: ''{1}''.

R1470.description = The name of an AssociationEnd's qualifiers must be unique.
R1470.message     = An AssociationEnd contained by ''{1}'' has one or more qualifiers with the same name: {2}.

R1480.description = An Attribute must be typed by a primitive element.
R1480.message     = The ''{0}'' attribute cannot be typed by the ''{1}'' {2}, because the latter is not primitive.

R1490.description = In an instance, the type of an instantiated attribute must be in the instantiated class or in its parent classes.
R1490.message     = The attribute link ''{0}'' instantiate the attribute ''{1}'', which is not in the instantiated class ''{2}'' nor in its super classes.

R1500.description = In an instance, the name of an instantiated attribute must be the same as the corresponding attribute.
R1500.message     = The instantiated attribute ''{0}'' does not have the same name as the attribute ''{1}''.

R1520.description = The name of a BindableInstance must be unique in it Classifier.
R1520.message     = There are several BindableInstances called ''{1}'' in the Classifier ''{0}''.

R1530.description = An association or a port should have a name.
R1530.message     = An element of metaclass ''{0}'' should have a name.

R1540.description = A BindableInstance's RepresentedFeature must not refer itself, directly or indirectly.
R1540.message     = The BindableInstance ''{0}'' refers to itself, directly or indirectly.

R1550.description = If a BinbdableInstance has a type and has a represented feature, the type of the instance must be compatible with the type of this feature.
R1550.message     = The type of the BindableInstance ''{0}'' is not compatible with the type: {1}.

R1560.description = Sub classes of an active class must be active.
R1560.message     = The active class ''{0}'' has a sub class that is not active: ''{1}''.

R1570.description = A class cannot represent more than one ClassAssociation.
R1570.message     = The class ''{0}'' represents more than one ClassAssociation.

R1580.description = Attributes, Associations and Operations cannot simultaneously be abstract and class.
R1580.message     = The ''{0}'' {1} cannot be both abstract and class.

R1590.description = Primitive GeneralClass cannot have associations.
R1590.message     = The primitive class ''{0}'' has an association.

R1600.description = A primitive class cannot have collaborations.
R1600.message     = The class ''{0}'' has one or more collaborations.

R1610.description = A primitive class cannot have state machines.
R1610.message     = The class ''{0}'' is primitive and has one or more state machines.

R1620.description = A non-abstract Classifier cannot have abstract methods.
R1620.message     = The Classifier ''{0}'' is not abstract but it contains an abstract method: ''{1}''.

R1640.description = A maximum of one ElementImport must exist between a NameSpace and another NameSpace or between an Operation and a NameSpace.
R1640.message     = The {1} ''{0}'' has more than one ElementImport towards ''{2}''.

R1650.description = An Enumeration cannot be abstract.
R1650.message     = The enumeration ''{0}'' is abstract.

R1660.description = An enumeration is always primitive.
R1660.message     = The enumeration ''{0}'' is not primitive.

R1670.description = EnumlerationLitteral defined in an Enumeration must have an unique name.
R1670.message     = The enumeration ''{0}'' contains at least two EnumerationLitterals with the same name: {1}.

R1680.description = For a Call-type Event, the 'Called operation' field must be defined, whereas the 'Instanciated signal' must be empty.
R1680.message     = The Event ''{0}'' is a Call-type Event, but either its ''called operation'' field is not defined, or its ''Instanciated signal'' field is not empty.

R1690.description = The 'Expression' field for a Change-type Event must be defined, whereas the 'Called operation' and 'Instanciated signal' fields must be empty.
R1690.message     = The Event ''{0}'' is a Change-type Event, but either its ''Expression'' field is not defined, or its ''Called operation'' or ''Instanciated signal'' fields are not empty.

R1700.description = The 'Instantiated signal' field for a signal-type Event must be defined, whereas the 'Called operation' and 'Expression' fields must be empty.
R1700.message     = The Event ''{0}'' is a signal-type Event, but either its ''Instantiated signal'' field is not defined, or its ''Called operation'' or ''Expression'' fields are not empty.

R1710.description = The 'Expression' field for a Time-type Event must be defined, whereas the 'Called operation' and 'Instanciated signal' fields must be empty.
R1710.message     = The Event ''{0}'' is a Time-type Event, but either its ''Expression'' field is not defined, or its ''Called operation'' or ''Instanciated signal'' fields are not empty.

R1720.description = An abstract NameSpace should only inherit from an abstract NameSpace.
R1720.message     = The namespace ''{0}'' inherits from the non abstract namespace ''{1}''.

R1730.description = A generalization must be created between two model elements of the same type, except in the case of a signal, which can specialize a Signal or a Class.
R1730.message     = There is a generalization between ''{1}'' and ''{2}'' which are not compatible.

R1740.description = An InformationFlow should convey information.
R1740.message     = The InformationFlow does not convey any information.

R1750.description = Repetition of names is forbidden for all AttributeLinks.
R1750.message     = The instance ''{0}'' contains at least two attribute links with the same name: {1}.

R1760.description = There cannot be inconsistency in the multiplicities of an Instance
R1760.message     = The MultiplicityMin ({1}) of the ''{0}'' Instance is greater than its MultiplicityMax ({2}).

R1780.description = The name of an Instance must be unique in its NameSpace.
R1780.message     = There are several instances called ''{1}'' in the namespace ''{0}''.

R1790.description = An instance must have a name, or the instantiation association must be defined.
R1790.message     = An instance has no name, and its instantiation association is not defined.

R1800.description = If an Operator is of type opt, loop, break or neg, there cannot be more than one Operand.
R1800.message     = The CombinedFragment ''{0}'' has an Operator of type  opt, loop, break or neg, but has more than one Operand.

R1810.description = An actual Gate on an InteractionUse must reference a formal Gate contained by the referenced Interaction.
R1810.message     = The actual Gate ''{0}'' references a formal Gate which is not contained by the referenced Interaction.

R1820.description = A gate cannot cover a lifeline.
R1820.message     = The gate ''{0}'' covers a lifeline.

R1830.description = A PartDecomposition cannot receive 'create' or 'destroy' messages.
R1830.message     = The PartDecomposition ''{0}'' receives ''create'' or ''destroy'' messages.

R1860.description = In an Interface, the visibility of all Features must be public.
R1860.message     = The ''{0}'' Interface has at least one non public feature: ''{1}''.

R1870.description = An Interface cannot be implemented twice by the same class or the same component.
R1870.message     = The NameSpace ''{1}'' implements the ''{0}'' Interface more than one time.

R1910.description = A Link that instantiates an association must be coherent with this association.
R1910.message     = The link ''{0}'' is not coherent with the association ''{1}'' it instantiates. The linked instances must instantiate the Classifier linked by the association, the link and the association should have the same name, the same roles, as well as the same properties.

R1950.description = Messages of type 'reply' cannot invoke an Operation.
R1950.message     = The message ''{0}'' invokes an Operation but is of ''reply'' kind.

R1960.description = A message must have the same name as the invoked Operation.
R1960.message     = The Message ''{0}'' does not have the same name as the Operation ''{1}'' it invokes.

R1970.description = A TemplateParameterSubstitution must reference a TemplateParameter.
R1970.message     = A template parameter substitution belonging to the ''{0}'' element does not reference a template parameter.

R1980.description = The names of a Classifier's Attributes and AssociationEnds must be unique.
R1980.message     = The Classifier ''{0}'' has at least two Attributes or two AssociationEnds with the same name: ''{1}''.

R1990.description = The name of a Classifier's inherited Attributes and Roles must be unique.
R1990.message     = The Classifier ''{0}'' has a duplicated name from its inherited Attributes and Roles : {1}

R2010.description = In a Dictionary, the name of each element must be unique.
R2010.message     = The Dictionary ''{0}'' has several elements with the same name.

R2030.description = In a PropertyContainer, the name of each EnumerationPropertyType must be unique.
R2030.message     = The PropertyContainer ''{0}'' has several EnumerationPropertyType with the same name.

R2050.description = Some elements must have a name.
R2050.message     = An element of metaclass ''{0}'' must have a name.

R2060.description = The name of a NameSpace must be unique in its NameSpace.
R2060.message     = There are several namespaces with the same name in the namespace ''{0}''.

R2080.description = In a PropertyTable, the name of each Property must be unique.
R2080.message     = The PropertyTable ''{0}'' has several Properties with the same name.

R2100.description = In a EnumerationPropertyType, the name of each PropertyEnumerationLiteral must be unique.
R2100.message     = The EnumerationPropertyType ''{0}'' has several PropertyEnumerationLiteral with the same name.

R2120.description = In a PropertyContainer, the name of each PropertyTable must be unique.
R2120.message     = The PropertyContainer ''{0}'' has several PropertyTable with the same name.

R2140.description = In a PropertyContainer, the name of each PropertyType must be unique.
R2140.message     = The PropertyContainer ''{0}'' has several PropertyType with the same name.

R2160.description = In an Analyst Container, the name of each element must be unique.
R2160.message     = The Analyst Container ''{0}'' has several elements with the same name.

R2170.description = The name of a Behavior must be unique in its NameSpace.
R2170.message     = There are several Behavior called ''{1}'' in the NameSpace ''{0}''.

R2180.description = No cycles can exist in a NameSpace inheritance graph.
R2180.message     = The namespace ''{0}'' is part of an inheritance cycle.

R2190.description = A maximum of one generalization may exist between two namespaces.
R2190.message     = The NameSpace ''{0}'' specializes the NameSpace ''{1}'' two or more times.

R2200.description = A NameSpace cannot both derive and import another NameSpace.
R2200.message     = The NameSpace ''{0}'' both derives and imports another NameSpace.

R2210.description = A leaf NameSpace cannot be derived.
R2210.message     = The namespace ''{0}'' is a leaf namespace and is derived.

R2220.description = A leaf NameSpace cannot be abstract.
R2220.message     = The namespace ''{0}'' is a leaf namespace and is abstract.

R2230.description = A root NameSpace cannot inherit from any other NameSpace.
R2230.message     = The namespace ''{0}'' is a root namespace but inherits from another namespace.

R2240.description = There can be no inter-package/inter-component dependency cycle.
R2240.message     = The package or component ''{0}'' is part of a dependency cycle.

R2250.description = All operations in a Classifier must have a different signature from inherited public and protected operations. Except for constructor, destructor and redefined operations.
R2250.message     = The Classifier ''{0}'' has an operation ''{1}'' masking the operation ''{2}'' inherited from the classifier ''{3}''.

R2260.description = Each Operation in a Classifier must have a different signature.
R2260.message     = The Classifier ''{1}'' has several operations with the same signature.

R2270.description = All an Operation's Collaborations must have a different name.
R2270.message     = The operation ''{0}'' has at least two collaborations with the same name: {1}

R2330.description = All an Operation's Parameters must have a different name.
R2330.message     = The operation ''{0}'' has at least two parameters with the same name: {1}

R2340.description = A redefined Operation must belong to a parent or an implemented Interface of the owner of the Operation.
R2340.message     = The Operation ''{0}'' redefines an operation which does not belong to any parent or any implemented Interface.

R2350.description = A private Operation cannot be redefined.
R2350.message     = The Operation ''{0}'' is private and is redefined.

R2360.description = The visibility of an Operation cannot be greater than that of the Operations it redefines.
R2360.message     = The visibility of the Operation ''{0}'' is greater than the operation it redefines.

R2370.description = A class (static) Operation cannot be redefined.
R2370.message     = The Operation ''{0}'' is static and is redefined.

R2380.description = An abstract Operation must not redefine a concrete Operation.
R2380.message     = The abstract Operation ''{0}'' redefines the Operation ''{1}'' which is a concrete Operation.

R2390.description = A constructor cannot have return parameters.
R2390.message     = The constructor ''{0}'' has a return parameter.

R2400.description = A destructor cannot have any kind of parameters.
R2400.message     = The destructor ''{0}'' has a parameter.

R2410.description = An operation cannot own both 'create' and 'destroy' stereotypes.
R2410.message     = The operation ''{0}'' own both 'create' and 'destroy' stereotypes.

R2420.description = An Operation must have the same signature as the Operation it redefines.
R2420.message     = The Operation ''{0}'' redefines an Operation but the signatures are not the same.

R2430.description = All an Operation's StateMachines must have a different name.
R2430.message     = The operation ''{0}'' has at least two state machines with the same name: {1}

R2440.description = An Operation cannot belong to an Enumeration.
R2440.message     = The Enumeration ''{0}'' contains an Operation.

R2450.description = A package cannot have inheritance links.
R2450.message     = The package ''{0}'' has inheritance links.

R2470.description = A maximum of one PackageImport link may exist between a NameSpace and a Package.
R2470.message     = The NameSpace ''{0}'' has more than one PackageImport toward the Package ''{1}''.

R2500.description = An 'out' Parameter cannot have a default value.
R2500.message     = The 'out' parameter ''{0}'' had a default value.

R2510.description = There cannot be any direct link between two Class Ports.
R2510.message     = There is a link between a port of the class ''{0}'' and a port of the class ''{1}''.

R2520.description = If a Port runs a delegation towards an internal part, it must provide at least one Interface.
R2520.message     = The port ''{0}'' runs a delegation towards an internal part, but does not provide any Interface.

R2530.description = If a Port receives a delegation from an internal part, it must provide at least one Interface.
R2530.message     = The port ''{0}'' receives a delegation from an internal part but does not provide any Interface.

R2540.description = The Interfaces provided by a port must be implemented by the Class that types the Port.
R2540.message     = The port ''{0}'' provided Interfaces that are not implemented by the Class that types the port.

R2550.description = If a Port is a behavior port, its provided Interfaces must be implemented by the Class it belongs to.
R2550.message     = The Port ''{0}'' provides Interfaces that are not implemented by the Class it belongs to.

R2560.description = A behavior Port must provide at least one Interface.
R2560.message     = The port ''{0}'' is a behavior port but does not provide any Interface.

R2570.description = If a Port is a behavior port, the type of the port must be either the Class it belongs to or undefined.
R2570.message     = The port ''{0}'' is a behavior port but its type is: ''{1}''.

R2580.description = A region cannot contain more than one deep history state.
R2580.message     = The region ''{0}'' contains more than one deep history state.

R2590.description = A region cannot contains more than one initial state.
R2590.message     = The region ''{0}'' contains more than one initial state.

R2600.description = A state machine or a state cannot have two states with the same name.
R2600.message     = The state machine or state ''{0}'' has at least two states named ''{1}''.

R2610.description = Only submachine states can have connection point references.
R2610.message     = The state ''{0}'' is not a submachine state but has connection point references.

R2620.description = Submachine states should not have entry or exit pseudo states defined.
R2620.message     = The submachine state ''{0}'' has an entry or exit pseudo state defined.

R2630.description = A region cannot contain more than one shallow history state.
R2630.message     = The region ''{0}'' contains more than one shallow history state.

R2640.description = The context of a state machine cannot be an Interface.
R2640.message     = The context of the state machine ''{0}'' is an Interface.

R2650.description = The context of a protocol state machine must be a Classifier.
R2650.message     = The context of the protocol state machine ''{0}'' is not a Classifier.

R2660.description = A state in a protocol state machine cannot have entry, exit, or do activity actions.
R2660.message     = The state ''{0}'' is in a protocol state machine and has entry, exit, or do activity actions.

R2670.description = A protocol state machine cannot have history vertexes.
R2670.message     = The protocol state machine ''{0}'' have history vertexes.

R2680.description = The number of parameter of a TaggedValue must be the same as the number of parameter defined in the TaggedValue declaration.
R2680.message     = The TaggedValue ''{0}'' does not have the same number of parameter defined in the TaggedValue declaration.

R2690.description = An element cannot have a TemplateBinding towards itself.
R2690.message     = The element ''{0}'' has a TemplateBinding towards itself.

R2700.description = A TemplateBinding can only substitute each TemplateParameter of the instantiated element once.
R2700.message     = The TemplateBinding ''{0}'' substitutes the TemplateParameter ''{1}'' more than one time.

R2720.description = A TemplateBinding must be created between two elements of the same type or between a Class and a DataType.
R2720.message     = The TemplateBinding ''{0}'' is not between two elements of the same type or between a Class and a DataType.

R2730.description = A TemplateBinding must substitute all the TemplateParameters of the instanciated template element, and the TemplateParameterSubstitution must be defines in the same order as the TemplateParameters.
R2730.message     = The TemplateBinding ''{0}'' does not substitute all the TemplateParameters of the instanciated template element, or it does not define its TemplateParameterSubstitution in the same order as the TemplateParameters.

R2740.description = In a TemplateBinding, the TemplateParameterSubstitution must belong to the instantiated template element.
R2740.message     = The TemplateBinding ''{0}'' contains TemplateParameterSubstitution that do not belong to the instantiated template element.

R2750.description = A transition from a fork or join pseudo state should not have guards or triggers.
R2750.message     = The transition from ''{1}'' to ''{2}'' has a guard or a trigger.

R2760.description = A fork segment must always target a state.
R2760.message     = The fork segment ''{0}'' does not target a state.

R2770.description = A join segment must always originate from a state.
R2770.message     = The join segment ''{0}'' does not originate from a state.

R2780.description = Transitions outgoing pseudostates may not have a trigger (except for those coming out of the initial pseudostate).
R2780.message     = The transition from ''{1}'' to the {3} ''{2}'' has a trigger.

R2790.description = A transition from one region to another in the same immediate enclosing composite state is not allowed.
R2790.message     = The state ''{3}'' has a transition from its region ''{1}'' to its region ''{2}''.

R2800.description = An initial vertex can have at most one outgoing transition.
R2800.message     = The initial vertex ''{0}'' has more than one outgoing transition.

R2810.description = History vertices can have at most one outgoing transition.
R2810.message     = The history vertex ''{0}'' has more than one outgoing transition.

R2820.description = The target of a transition cannot be an initial vertex.
R2820.message     = A transition has a target ''{1}'' that is an initial vertex.

R2830.description = The source of a transition cannot be a final vertex.
R2830.message     = A transition has a source ''{1}'' that is a final vertex.

R2840.description = A transition should have only one of Processed, Effects, or BehaviorEffet defined.
R2840.message     = A transition from ''{1}'' to ''{2}'' has more than one of Processed, Effects, or BehaviorEffet defined.

R2850.description = An element cannot have a usage dependency towards itself.
R2850.message     = The element ''{0}'' has a usage dependency towards itself.

R2860.description = A maximum of one extension/inclusion relationship may exist between two Use Cases.
R2860.message     = The Use Case ''{0}'' has more than one extension/inclusion relationship towards another Use Case.

R2870.description = There must be no cycle in Use Cases extension relationship graph.
R2870.message     = The Use Case ''{0}'' is part of an extension relationship cycle.

R2880.description = There must be no cycle in Use Cases inclusion relationship graph.
R2880.message     = The Use Case ''{0}'' is part of an inclusion relationship cycle.

R2890.description = A communication link cannot be reflexive.
R2890.message     = ''{1}'' has a reflexive communication link.

R2900.description = An extension relationship must reference at least one Extension Point.
R2900.message     = An extension relationship from ''{0}'' to ''{1}'' does not reference an Extension Point.

R2910.description = An extension relationship can only reference the target's Extension Points.
R2910.message     = An extension relationship from ''{0}'' to ''{1}'' references Extension Points that are not from the target''s Extension Points.

R2920.description = Extension Points can only be referenced by an extension relationship.
R2920.message     = A relationship from ''{0}'' to ''{1}'' references Extension Points but is not an extension relationship.

R2930.description = Message and CommunicationMessage cannot have both Signal and Operation properties defined.
R2930.message     = The {1} ''{0}'' have both Signal and Operation properties defined.

R2940.description = All transitions incoming a join vertex must originate in different regions of an orthogonal state.
R2940.message     = The join vertex ''{0}'' has transitions that originate in the same region of an orthogonal state or in different states. 

R2950.description = All transitions outgoing a fork vertex must target states in different regions of an orthogonal state.
R2950.message     = The fork vertex ''{0}'' has transitions that targets the same region of an orthogonal state or different states.

R2960.description = Synonym, antonym, homonym, context, and kind-of dependencies can only link two terms.
R2960.message     = There is a synonym, antonym, homonym, context, or kind-of dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R2970.description = An Assigned dependency must be from an Actor, an Interface, a Package, or a Process, toward a Goal.
R2970.message     = There is an assigned dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R2980.description = A Measure dependency must be from a ModelElement toward a Goal.
R2980.message     = There is a measure dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R2990.description = A Guarantee dependency must be from a Requirement toward a Goal.
R2990.message     = There is a guarantee dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3000.description = Positive influence and Negative influence dependencies must be between two Goals.
R3000.message     = There is a Positive influence or a Negative influence dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3010.description = A refers dependency must be between a Business Rule and a Term.
R3010.message     = There is a refers dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3020.description = A related dependency must be must be between two Business Rules or two Terms.
R3020.message     = There is a related dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3030.description = A refine dependency must be between either: 1) from a Model Element or a Requirement towards a Requirement 2) from a Business Rule, an Activity or an Operation towards a Business Rule. 
R3030.message     = There is a refine dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3040.description = An implement dependency must be from a Process or a Class towards a Business Rule.
R3040.message     = There is an implement dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3050.description = A part dependency must be between two Requirements or between two Goals.
R3050.message     = There is a part dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3060.description = A satisfy or verify dependency must be from a ModelElement towards a Requirement.
R3060.message     = There is a satisfy or a verify dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3070.description = A derive dependency must be from a UseCase or a Requirement towards a Requirement.
R3070.message     = There is a derive dependency between ''{1}'' ({2}) and ''{3}'' ({4}).

R3080.description = All FlowNodes should be part of a sequence starting with a StartEvent and finishing with an EndEvent.
R3080.message     = The FlowNode ''{0}'' is part of a sequence which does not start with a StartEvent or does not end with a EndEvent.

R3090.description = A SequenceFlow cannot have its source or target in different Pools.
R3090.message     = The SequenceFlow ''{0}'' has its source or target in different Pools.

R3100.description = A SequenceFlow in a SubProcess must have its origin and target in the same Sub-Process.
R3100.message     = The SequenceFlow ''{0}'' has its source or target in different sub-processes.

R3110.description = A SequenceFlow cannot target a StartEvent nor have an EndEvent as its source.
R3110.message     = The SequenceFlow ''{0}'' targets a StartEvent or have an EndEvent as its source.

R3130.description = A MessageFlow cannot target an EndEvent or an IntermediateThrowEvent, or have a StartEvent or an IntermediateCatchEvent as its source.
R3130.message     = The MessageFlow ''{0}'' targets an EndEvent or an IntermediateThrowEvent, or has a StartEvent or an IntermediateCatchEvent as its source.

R3140.description = All outgoing SequenceFlow from an EventBasedGateway or a ParallelGateway must have its guard properties empty.
R3140.message     = The SequenceFlow ''{1}'' has an outgoing SequenceFlow with its property guard not empty.

R3150.description = A MessageFlow cannot link two elements in the same lane.
R3150.message     = The MessageFlow ''{0}'' links two elements in the same lane.

R3160.description = A MessageFlow cannot have a Gateway as its source or target.
R3160.message     = The MessageFlow ''{0}'' has a Gateway as its source or target.

R3170.description = A Gateway, except for ParallelGateway, must have at least two outgoing SequenceFlows.
R3170.message     = The Gateway ''{0}'' has less than two outgoing SequenceFlow.

R3180.description = A FlowElement (and respectively a BaseElement) cannot have a SequenceFlow (respectively a MessageFlow) towards itself.
R3180.message     = The element ''{1}'' of type {0} has a {2} towards itself.

R3190.description = A DataAssociation cannot target a DataInput nor have a DataOutput as its source.
R3190.message     = The DataAssociation ''{0}'' has a DataOutput as its source or targets a DataInput.

R3220.description = A SequenceFlow outgoing from an EventBasedGateway must target an IntermediaryCatchEvent.
R3220.message     = The SequenceFlow ''{0}'' has an EventBasedGateway as its source but does not target an IntermediaryCatchEvent.

R3230.description = All SequenceFlows outgoing from an ExclusiveGateway must have a guard, except for the default SequenceFlow.
R3230.message     = The ExclusiveGateway ''{0}'' has a SequenceFlow which is not the default that has no guard.

R3240.description = There can only be one sequence in a Process, a Sub-Process or a Pool.
R3240.message     = The ''{1}'' {0} contains more than one sequence.

R3250.description = A Process, a Sub-Process, or a Pool should have at least one StartEvent and one EndEvent.
R3250.message     = The ''{1}'' {0} does not have at least one StartEvent and one EndEvent.

R3260.description = The model should not contain missing elements.
R3260.message     = The ''{0}'' element is missing.

R3270.description = The State of a BpmnItemAwareElement must belong to its represented GeneralClass.
R3270.message     = The State ''{1}'' referenced by the BpmnItemAwareElement ''{0}'' should be part of the composition hierarchy of ''{2}''.