Open Source Projects Europe

<?xml version="1.0"?>
<sect2 id="RCL.INSTALL.CONFIG.RECOLLCONF">
<title>Recoll main configuration file, recoll.conf </title>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.WHATDOCS">
<title>Parameters affecting what documents we index </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.TOPDIRS">
<term><varname>topdirs</varname></term>
<listitem><para>Space-separated list of files or
directories to recursively index. Default to ~ (indexes
$HOME). You can use symbolic links in the list, they will be followed,
independantly of the value of the followLinks variable.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.SKIPPEDNAMES">
<term><varname>skippedNames</varname></term>
<listitem><para>Files and directories which should be ignored. 
White space separated list of wildcard patterns (simple ones, not paths,
must contain no / ), which will be tested against file and directory
names.  The list in the default configuration does not exclude hidden
directories (names beginning with a dot), which means that it may index
quite a few things that you do not want. On the other hand, email user
agents like Thunderbird usually store messages in hidden directories, and
you probably want this indexed. One possible solution is to have ".*" in
"skippedNames", and add things like "~/.thunderbird" "~/.evolution" to
"topdirs".  Not even the file names are indexed for patterns in this
list, see the "noContentSuffixes" variable for an alternative approach
which indexes the file names. Can be redefined for any
subtree.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.SKIPPEDNAMES-">
<term><varname>skippedNames-</varname></term>
<listitem><para>List of name endings to remove from the default skippedNames
list. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.SKIPPEDNAMES+">
<term><varname>skippedNames+</varname></term>
<listitem><para>List of name endings to add to the default skippedNames
list. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NOCONTENTSUFFIXES">
<term><varname>noContentSuffixes</varname></term>
<listitem><para>List of name endings (not necessarily dot-separated suffixes) for
which we don't try MIME type identification, and don't uncompress or
index content. Only the names will be indexed. This
complements the now obsoleted recoll_noindex list from the mimemap file,
which will go away in a future release (the move from mimemap to
recoll.conf allows editing the list through the GUI). This is different
from skippedNames because these are name ending matches only (not
wildcard patterns), and the file name itself gets indexed normally. This
can be redefined for subdirectories.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NOCONTENTSUFFIXES-">
<term><varname>noContentSuffixes-</varname></term>
<listitem><para>List of name endings to remove from the default noContentSuffixes
list. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NOCONTENTSUFFIXES+">
<term><varname>noContentSuffixes+</varname></term>
<listitem><para>List of name endings to add to the default noContentSuffixes
list. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.SKIPPEDPATHS">
<term><varname>skippedPaths</varname></term>
<listitem><para>Paths we should not go into. Space-separated list of
wildcard expressions for filesystem paths. Can contain files and
directories. The database and configuration directories will
automatically be added. The expressions are matched using 'fnmatch(3)'
with the FNM_PATHNAME flag set by default. This means that '/' characters
must be matched explicitely. You can set 'skippedPathsFnmPathname' to 0
to disable the use of FNM_PATHNAME (meaning that '/*/dir3' will match
'/dir1/dir2/dir3').  The default value contains the usual mount point for
removable media to remind you that it is a bad idea to have Recoll work
on these (esp. with the monitor: media gets indexed on mount, all data
gets erased on unmount).  Explicitely adding '/media/xxx' to the topdirs
will override this.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.SKIPPEDPATHSFNMPATHNAME">
<term><varname>skippedPathsFnmPathname</varname></term>
<listitem><para>Set to 0 to
override use of FNM_PATHNAME for matching skipped
paths. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.DAEMSKIPPEDPATHS">
<term><varname>daemSkippedPaths</varname></term>
<listitem><para>skippedPaths equivalent specific to
real time indexing. This enables having parts of the tree
which are initially indexed but not monitored. If daemSkippedPaths is
not set, the daemon uses skippedPaths.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.ZIPSKIPPEDNAMES">
<term><varname>zipSkippedNames</varname></term>
<listitem><para>Space-separated list of wildcard expressions for names that should
be ignored inside zip archives. This is used directly by
the zip handler, and has a function similar to skippedNames, but works
independantly. Can be redefined for subdirectories. Supported by recoll
1.20 and newer. See
https://www.lesbonscomptes.com/recoll/faqsandhowtos/FilteringOutZipArchiveMembers.html
</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.FOLLOWLINKS">
<term><varname>followLinks</varname></term>
<listitem><para>Follow symbolic links during
indexing. The default is to ignore symbolic links to avoid
multiple indexing of linked files. No effort is made to avoid duplication
when this option is set to true. This option can be set individually for
each of the 'topdirs' members by using sections. It can not be changed
below the 'topdirs' level. Links in the 'topdirs' list itself are always
followed.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.INDEXEDMIMETYPES">
<term><varname>indexedmimetypes</varname></term>
<listitem><para>Restrictive list of
indexed mime types. Normally not set (in which case all
supported types are indexed). If it is set, only the types from the list
will have their contents indexed. The names will be indexed anyway if
indexallfilenames is set (default). MIME type names should be taken from
the mimemap file (the values may be different from xdg-mime or file -i
output in some cases). Can be redefined for subtrees.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.EXCLUDEDMIMETYPES">
<term><varname>excludedmimetypes</varname></term>
<listitem><para>List of excluded MIME
types. Lets you exclude some types from indexing. MIME type
names should be taken from the mimemap file (the values may be different
from xdg-mime or file -i output in some cases) Can be redefined for
subtrees.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NOMD5MIMETYPES">
<term><varname>nomd5mimetypes</varname></term>
<listitem><para>Don't compute md5 for
these types. md5 checksums are used only for deduplicating
results, and can be very expensive to compute on multimedia or other big
files. This list lets you turn off md5 computation for selected types. It
is global (no redefinition for subtrees). At the moment, it only has an
effect for external handlers (exec and execm). The file types can be
specified by listing either MIME types (e.g. audio/mpeg) or handler names
(e.g. rclaudio).</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.COMPRESSEDFILEMAXKBS">
<term><varname>compressedfilemaxkbs</varname></term>
<listitem><para>Size limit for compressed
files. We need to decompress these in a
temporary directory for identification, which can be wasteful in some
cases. Limit the waste. Negative means no limit. 0 results in no
processing of any compressed file. Default 50 MB.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.TEXTFILEMAXMBS">
<term><varname>textfilemaxmbs</varname></term>
<listitem><para>Size limit for text
files. Mostly for skipping monster
logs. Default 20 MB.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.INDEXALLFILENAMES">
<term><varname>indexallfilenames</varname></term>
<listitem><para>Index the file names of
unprocessed files Index the names of files the contents of
which we don't index because of an excluded or unsupported MIME
type.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.USESYSTEMFILECOMMAND">
<term><varname>usesystemfilecommand</varname></term>
<listitem><para>Use a system command
for file MIME type guessing as a final step in file type
identification This is generally useful, but will usually
cause the indexing of many bogus 'text' files. See 'systemfilecommand'
for the command used.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.SYSTEMFILECOMMAND">
<term><varname>systemfilecommand</varname></term>
<listitem><para>Command used to guess
MIME types if the internal methods fails This should be a
"file -i" workalike.  The file path will be added as a last parameter to
the command line. 'xdg-mime' works better than the traditional 'file'
command, and is now the configured default (with a hard-coded fallback to
'file')</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.PROCESSWEBQUEUE">
<term><varname>processwebqueue</varname></term>
<listitem><para>Decide if we process the
Web queue. The queue is a directory where the Recoll Web
browser plugins create the copies of visited pages.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.TEXTFILEPAGEKBS">
<term><varname>textfilepagekbs</varname></term>
<listitem><para>Page size for text
files. If this is set, text/plain files will be divided
into documents of approximately this size. Will reduce memory usage at
index time and help with loading data in the preview window at query
time. Particularly useful with very big files, such as application or
system logs. Also see textfilemaxmbs and
compressedfilemaxkbs.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MEMBERMAXKBS">
<term><varname>membermaxkbs</varname></term>
<listitem><para>Size limit for archive
members. This is passed to the filters in the environment
as RECOLL_FILTER_MAXMEMBERKB.</para></listitem></varlistentry>
</variablelist></sect3>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.TERMS">
<title>Parameters affecting how we generate terms </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.INDEXSTRIPCHARS">
<term><varname>indexStripChars</varname></term>
<listitem><para>Decide if we store
character case and diacritics in the index. If we do,
searches sensitive to case and diacritics can be performed, but the index
will be bigger, and some marginal weirdness may sometimes occur. The
default is a stripped index. When using multiple indexes for a search,
this parameter must be defined identically for all. Changing the value
implies an index reset.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NONUMBERS">
<term><varname>nonumbers</varname></term>
<listitem><para>Decides if terms will be
generated for numbers. For example "123", "1.5e6",
192.168.1.4, would not be indexed if nonumbers is set ("value123" would
still be). Numbers are often quite interesting to search for, and this
should probably not be set except for special situations, ie, scientific
documents with huge amounts of numbers in them, where setting nonumbers
will reduce the index size. This can only be set for a whole index, not
for a subtree.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.DEHYPHENATE">
<term><varname>dehyphenate</varname></term>
<listitem><para>Determines if we index
'coworker' also when the input is 'co-worker'. This is new
in version 1.22, and on by default. Setting the variable to off allows
restoring the previous behaviour.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NOCJK">
<term><varname>nocjk</varname></term>
<listitem><para>Decides if specific East Asian
(Chinese Korean Japanese) characters/word splitting is turned
off. This will save a small amount of CPU if you have no CJK
documents. If your document base does include such text but you are not
interested in searching it, setting nocjk may be a
significant time and space saver.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.CJKNGRAMLEN">
<term><varname>cjkngramlen</varname></term>
<listitem><para>This lets you adjust the size of
n-grams used for indexing CJK text. The default value of 2 is
probably appropriate in most cases. A value of 3 would allow more precision
and efficiency on longer words, but the index will be approximately twice
as large.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.INDEXSTEMMINGLANGUAGES">
<term><varname>indexstemminglanguages</varname></term>
<listitem><para>Languages for which to create stemming expansion
data. Stemmer names can be found by executing 'recollindex
-l', or this can also be set from a list in the GUI.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.DEFAULTCHARSET">
<term><varname>defaultcharset</varname></term>
<listitem><para>Default character
set. This is used for files which do not contain a
character set definition (e.g.: text/plain). Values found inside files,
e.g. a 'charset' tag in HTML documents, will override it. If this is not
set, the default character set is the one defined by the NLS environment
($LC_ALL, $LC_CTYPE, $LANG), or ultimately iso-8859-1 (cp-1252 in fact).
If for some reason you want a general default which does not match your
LANG and is not 8859-1, use this variable. This can be redefined for any
sub-directory.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.UNAC_EXCEPT_TRANS">
<term><varname>unac_except_trans</varname></term>
<listitem><para>A list of characters,
encoded in UTF-8, which should be handled specially
when converting text to unaccented lowercase. For
example, in Swedish, the letter a with diaeresis has full alphabet
citizenship and should not be turned into an a.
Each element in the space-separated list has the special character as
first element and the translation following. The handling of both the
lowercase and upper-case versions of a character should be specified, as
appartenance to the list will turn-off both standard accent and case
processing. The value is global and affects both indexing and querying.
Examples:
Swedish:
unac_except_trans = ���� ���� ���� ���� ���� ���� ��ss ��oe ��oe ��ae ��ae ���ff ���fi ���fl ���� ����
. German:
unac_except_trans = ���� ���� ���� ���� ���� ���� ��ss ��oe ��oe ��ae ��ae ���ff ���fi ���fl
In French, you probably want to decompose oe and ae and nobody would type
a German ��
unac_except_trans = ��ss ��oe ��oe ��ae ��ae ���ff ���fi ���fl
. The default for all until someone protests follows. These decompositions
are not performed by unac, but it is unlikely that someone would type the
composed forms in a search.
unac_except_trans = ��ss ��oe ��oe ��ae ��ae ���ff ���fi ���fl</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MAILDEFCHARSET">
<term><varname>maildefcharset</varname></term>
<listitem><para>Overrides the default
character set for email messages which don't specify
one. This is mainly useful for readpst (libpst) dumps,
which are utf-8 but do not say so.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.LOCALFIELDS">
<term><varname>localfields</varname></term>
<listitem><para>Set fields on all files
(usually of a specific fs area). Syntax is the usual:
name = value ; attr1 = val1 ; [...]
value is empty so this needs an initial semi-colon. This is useful, e.g.,
for setting the rclaptg field for application selection inside
mimeview.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.TESTMODIFUSEMTIME">
<term><varname>testmodifusemtime</varname></term>
<listitem><para>Use mtime instead of
ctime to test if a file has been modified. The time is used
in addition to the size, which is always used.
Setting this can reduce re-indexing on systems where extended attributes
are used (by some other application), but not indexed, because changing
extended attributes only affects ctime.
Notes:
- This may prevent detection of change in some marginal file rename cases
(the target would need to have the same size and mtime).
- You should probably also set noxattrfields to 1 in this case, except if
you still prefer to perform xattr indexing, for example if the local
file update pattern makes it of value (as in general, there is a risk
for pure extended attributes updates without file modification to go
undetected). Perform a full index reset after changing this.
</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NOXATTRFIELDS">
<term><varname>noxattrfields</varname></term>
<listitem><para>Disable extended attributes
conversion to metadata fields. This probably needs to be
set if testmodifusemtime is set.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.METADATACMDS">
<term><varname>metadatacmds</varname></term>
<listitem><para>Define commands to
gather external metadata, e.g. tmsu tags. 
There can be several entries, separated by semi-colons, each defining
which field name the data goes into and the command to use. Don't forget the
initial semi-colon. All the field names must be different. You can use
aliases in the "field" file if necessary.
As a not too pretty hack conceded to convenience, any field name
beginning with "rclmulti" will be taken as an indication that the command
returns multiple field values inside a text blob formatted as a recoll
configuration file ("fieldname = fieldvalue" lines). The rclmultixx name
will be ignored, and field names and values will be parsed from the data.
Example: metadatacmds = ; tags = tmsu tags %f; rclmulti1 = cmdOutputsConf %f
</para></listitem></varlistentry>
</variablelist></sect3>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.STORE">
<title>Parameters affecting where and how we store things </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.CACHEDIR">
<term><varname>cachedir</varname></term>
<listitem><para>Top directory for Recoll data. Recoll data
directories are normally located relative to the configuration directory
(e.g. ~/.recoll/xapiandb, ~/.recoll/mboxcache). If 'cachedir' is set, the
directories are stored under the specified value instead (e.g. if
cachedir is ~/.cache/recoll, the default dbdir would be
~/.cache/recoll/xapiandb).  This affects dbdir, webcachedir,
mboxcachedir, aspellDicDir, which can still be individually specified to
override cachedir.  Note that if you have multiple configurations, each
must have a different cachedir, there is no automatic computation of a
subpath under cachedir.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MAXFSOCCUPPC">
<term><varname>maxfsoccuppc</varname></term>
<listitem><para>Maximum file system occupation
over which we stop indexing. The value is a percentage,
corresponding to what the "Capacity" df output column shows. The default
value is 0, meaning no checking.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.XAPIANDB">
<term><varname>xapiandb</varname></term>
<listitem><para>Xapian database directory
location. This will be created on first indexing. If the
value is not an absolute path, it will be interpreted as relative to
cachedir if set, or the configuration directory (-c argument or
$RECOLL_CONFDIR).  If nothing is specified, the default is then
~/.recoll/xapiandb/</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.IDXSTATUSFILE">
<term><varname>idxstatusfile</varname></term>
<listitem><para>Name of the scratch file where the indexer process updates its
status. Default: idxstatus.txt inside the configuration
directory.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MBOXCACHEDIR">
<term><varname>mboxcachedir</varname></term>
<listitem><para>Directory location for storing mbox message offsets cache
files. This is normally 'mboxcache' under cachedir if set,
or else under the configuration directory, but it may be useful to share
a directory between different configurations.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MBOXCACHEMINMBS">
<term><varname>mboxcacheminmbs</varname></term>
<listitem><para>Minimum mbox file size over which we cache the offsets. There is really no sense in caching offsets for small files. The
default is 5 MB.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.WEBCACHEDIR">
<term><varname>webcachedir</varname></term>
<listitem><para>Directory where we store the archived web pages. This is only used by the web history indexing code
Default: cachedir/webcache if cachedir is set, else
$RECOLL_CONFDIR/webcache</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.WEBCACHEMAXMBS">
<term><varname>webcachemaxmbs</varname></term>
<listitem><para>Maximum size in MB of the Web archive. This is only used by the web history indexing code.
Default: 40 MB.
Reducing the size will not physically truncate the file.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.WEBQUEUEDIR">
<term><varname>webqueuedir</varname></term>
<listitem><para>The path to the Web indexing queue. This used to be
hard-coded in the old plugin as ~/.recollweb/ToIndex so there would be no
need or possibility to change it, but the WebExtensions plugin now downloads
the files to the user Downloads directory, and a script moves them to
webqueuedir. The script reads this value from the config so it has become
possible to change it.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.WEBDOWNLOADSDIR">
<term><varname>webdownloadsdir</varname></term>
<listitem><para>The path to browser downloads directory. This is
where the new browser add-on extension has to create the files. They are
then moved by a script to webqueuedir.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.ASPELLDICDIR">
<term><varname>aspellDicDir</varname></term>
<listitem><para>Aspell dictionary storage directory location. The
aspell dictionary (aspdict.(lang).rws) is normally stored in the
directory specified by cachedir if set, or under the configuration
directory.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.FILTERSDIR">
<term><varname>filtersdir</varname></term>
<listitem><para>Directory location for executable input handlers. If
RECOLL_FILTERSDIR is set in the environment, we use it instead. Defaults
to $prefix/share/recoll/filters. Can be redefined for
subdirectories.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.ICONSDIR">
<term><varname>iconsdir</varname></term>
<listitem><para>Directory location for icons. The only reason to
change this would be if you want to change the icons displayed in the
result list. Defaults to $prefix/share/recoll/images</para></listitem></varlistentry>
</variablelist></sect3>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.PERFS">
<title>Parameters affecting indexing performance and resource usage </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.IDXFLUSHMB">
<term><varname>idxflushmb</varname></term>
<listitem><para>Threshold (megabytes of new data) where we flush from memory to
disk index. Setting this allows some control over memory
usage by the indexer process. A value of 0 means no explicit flushing,
which lets Xapian perform its own thing, meaning flushing every
$XAPIAN_FLUSH_THRESHOLD documents created, modified or deleted: as memory
usage depends on average document size, not only document count, the
Xapian approach is is not very useful, and you should let Recoll manage
the flushes. The program compiled value is 0. The configured default
value (from this file) is 10 MB, and will be too low in many cases (it is
chosen to conserve memory). If you are looking
for maximum speed, you may want to experiment with values between 20 and
200. In my experience, values beyond this are always counterproductive. If
you find otherwise, please drop me a note.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.FILTERMAXSECONDS">
<term><varname>filtermaxseconds</varname></term>
<listitem><para>Maximum external filter execution time in
seconds. Default 1200 (20mn). Set to 0 for no limit. This
is mainly to avoid infinite loops in postscript files
(loop.ps)</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.FILTERMAXMBYTES">
<term><varname>filtermaxmbytes</varname></term>
<listitem><para>Maximum virtual memory space for filter processes
(setrlimit(RLIMIT_AS)), in megabytes. Note that this
includes any mapped libs (there is no reliable Linux way to limit the
data space only), so we need to be a bit generous here. Anything over
2000 will be ignored on 32 bits machines.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.THRQSIZES">
<term><varname>thrQSizes</varname></term>
<listitem><para>Stage input queues configuration. There are three
internal queues in the indexing pipeline stages (file data extraction,
terms generation, index update). This parameter defines the queue depths
for each stage (three integer values). If a value of -1 is given for a
given stage, no queue is used, and the thread will go on performing the
next stage. In practise, deep queues have not been shown to increase
performance. Default: a value of 0 for the first queue tells Recoll to
perform autoconfiguration based on the detected number of CPUs (no need
for the two other values in this case).  Use thrQSizes = -1 -1 -1 to
disable multithreading entirely.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.THRTCOUNTS">
<term><varname>thrTCounts</varname></term>
<listitem><para>Number of threads used for each indexing stage. The
three stages are: file data extraction, terms generation, index
update). The use of the counts is also controlled by some special values
in thrQSizes: if the first queue depth is 0, all counts are ignored
(autoconfigured); if a value of -1 is used for a queue depth, the
corresponding thread count is ignored. It makes no sense to use a value
other than 1 for the last stage because updating the Xapian index is
necessarily single-threaded (and protected by a mutex).</para></listitem></varlistentry>
</variablelist></sect3>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.MISC">
<title>Miscellaneous parameters </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.LOGLEVEL">
<term><varname>loglevel</varname></term>
<listitem><para>Log file verbosity 1-6. A value of 2 will print
only errors and warnings. 3 will print information like document updates,
4 is quite verbose and 6 very verbose.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.LOGFILENAME">
<term><varname>logfilename</varname></term>
<listitem><para>Log file destination. Use 'stderr' (default) to write to the
console. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.IDXLOGLEVEL">
<term><varname>idxloglevel</varname></term>
<listitem><para>Override loglevel for the indexer. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.IDXLOGFILENAME">
<term><varname>idxlogfilename</varname></term>
<listitem><para>Override logfilename for the indexer. </para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.DAEMLOGLEVEL">
<term><varname>daemloglevel</varname></term>
<listitem><para>Override loglevel for the indexer in real time
mode. The default is to use the idx... values if set, else
the log... values.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.DAEMLOGFILENAME">
<term><varname>daemlogfilename</varname></term>
<listitem><para>Override logfilename for the indexer in real time
mode. The default is to use the idx... values if set, else
the log... values.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.ORGIDXCONFDIR">
<term><varname>orgidxconfdir</varname></term>
<listitem><para>Original location of the configuration directory. This is used exclusively for movable datasets. Locating the
configuration directory inside the directory tree makes it possible to
provide automatic query time path translations once the data set has
moved (for example, because it has been mounted on another
location).</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.CURIDXCONFDIR">
<term><varname>curidxconfdir</varname></term>
<listitem><para>Current location of the configuration directory. Complement orgidxconfdir for movable datasets. This should be used
if the configuration directory has been copied from the dataset to
another location, either because the dataset is readonly and an r/w copy
is desired, or for performance reasons. This records the original moved
location before copy, to allow path translation computations.  For
example if a dataset originally indexed as '/home/me/mydata/config' has
been mounted to '/media/me/mydata', and the GUI is running from a copied
configuration, orgidxconfdir would be '/home/me/mydata/config', and
curidxconfdir (as set in the copied configuration) would be
'/media/me/mydata/config'.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.IDXRUNDIR">
<term><varname>idxrundir</varname></term>
<listitem><para>Indexing process current directory. The input
handlers sometimes leave temporary files in the current directory, so it
makes sense to have recollindex chdir to some temporary directory. If the
value is empty, the current directory is not changed. If the
value is (literal) tmp, we use the temporary directory as set by the
environment (RECOLL_TMPDIR else TMPDIR else /tmp). If the value is an
absolute path to a directory, we go there.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.CHECKNEEDRETRYINDEXSCRIPT">
<term><varname>checkneedretryindexscript</varname></term>
<listitem><para>Script used to heuristically check if we need to retry indexing
files which previously failed.  The default script checks
the modified dates on /usr/bin and /usr/local/bin. A relative path will
be looked up in the filters dirs, then in the path. Use an absolute path
to do otherwise.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.RECOLLHELPERPATH">
<term><varname>recollhelperpath</varname></term>
<listitem><para>Additional places to search for helper executables. This is only used on Windows for now.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.IDXABSMLEN">
<term><varname>idxabsmlen</varname></term>
<listitem><para>Length of abstracts we store while indexing. Recoll stores an abstract for each indexed file.
The text can come from an actual 'abstract' section in the
document or will just be the beginning of the document. It is stored in
the index so that it can be displayed inside the result lists without
decoding the original file. The idxabsmlen parameter
defines the size of the stored abstract. The default value is 250
bytes. The search interface gives you the choice to display this stored
text or a synthetic abstract built by extracting text around the search
terms. If you always prefer the synthetic abstract, you can reduce this
value and save a little space.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.IDXMETASTOREDLEN">
<term><varname>idxmetastoredlen</varname></term>
<listitem><para>Truncation length of stored metadata fields. This
does not affect indexing (the whole field is processed anyway), just the
amount of data stored in the index for the purpose of displaying fields
inside result lists or previews. The default value is 150 bytes which
may be too low if you have custom fields.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.ASPELLLANGUAGE">
<term><varname>aspellLanguage</varname></term>
<listitem><para>Language definitions to use when creating the aspell
dictionary. The value must match a set of aspell language
definition files. You can type "aspell dicts"  to see a list The default
if this is not set is to use the NLS environment to guess the
value.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.ASPELLADDCREATEPARAM">
<term><varname>aspellAddCreateParam</varname></term>
<listitem><para>Additional option and parameter to aspell dictionary creation
command. Some aspell packages may need an additional option
(e.g. on Debian Jessie: --local-data-dir=/usr/lib/aspell). See Debian bug
772415.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.ASPELLKEEPSTDERR">
<term><varname>aspellKeepStderr</varname></term>
<listitem><para>Set this to have a look at aspell dictionary creation
errors. There are always many, so this is mostly for
debugging.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.NOASPELL">
<term><varname>noaspell</varname></term>
<listitem><para>Disable aspell use. The aspell dictionary generation
takes time, and some combinations of aspell version, language, and local
terms, result in aspell crashing, so it sometimes makes sense to just
disable the thing.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MONAUXINTERVAL">
<term><varname>monauxinterval</varname></term>
<listitem><para>Auxiliary database update interval. The real time
indexer only updates the auxiliary databases (stemdb, aspell)
periodically, because it would be too costly to do it for every document
change. The default period is one hour.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MONIXINTERVAL">
<term><varname>monixinterval</varname></term>
<listitem><para>Minimum interval (seconds) between processings of the indexing
queue. The real time indexer does not process each event
when it comes in, but lets the queue accumulate, to diminish overhead and
to aggregate multiple events affecting the same file. Default 30
S.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MONDELAYPATTERNS">
<term><varname>mondelaypatterns</varname></term>
<listitem><para>Timing parameters for the real time indexing. Definitions for files which get a longer delay before reindexing
is allowed. This is for fast-changing files, that should only be
reindexed once in a while. A list of wildcardPattern:seconds pairs. The
patterns are matched with fnmatch(pattern, path, 0) You can quote entries
containing white space with double quotes (quote the whole entry, not the
pattern). The default is empty.
Example: mondelaypatterns = *.log:20 "*with spaces.*:30"</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MONIONICECLASS">
<term><varname>monioniceclass</varname></term>
<listitem><para>ionice class for the real time indexing process On platforms where this is supported. The default value is
3.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MONIONICECLASSDATA">
<term><varname>monioniceclassdata</varname></term>
<listitem><para>ionice class parameter for the real time indexing process. On platforms where this is supported. The default is
empty.</para></listitem></varlistentry>
</variablelist></sect3>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.QUERY">
<title>Query-time parameters (no impact on the index) </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.AUTODIACSENS">
<term><varname>autodiacsens</varname></term>
<listitem><para>auto-trigger diacritics sensitivity (raw index only). IF the index is not stripped, decide if we automatically trigger
diacritics sensitivity if the search term has accented characters (not in
unac_except_trans). Else you need to use the query language and the "D"
modifier to specify diacritics sensitivity. Default is no.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.AUTOCASESENS">
<term><varname>autocasesens</varname></term>
<listitem><para>auto-trigger case sensitivity (raw index only). IF
the index is not stripped (see indexStripChars), decide if we
automatically trigger character case sensitivity if the search term has
upper-case characters in any but the first position. Else you need to use
the query language and the "C" modifier to specify character-case
sensitivity. Default is yes.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MAXTERMEXPAND">
<term><varname>maxTermExpand</varname></term>
<listitem><para>Maximum query expansion count
for a single term (e.g.: when using wildcards). This only
affects queries, not indexing. We used to not limit this at all (except
for filenames where the limit was too low at 1000), but it is
unreasonable with a big index. Default 10000.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MAXXAPIANCLAUSES">
<term><varname>maxXapianClauses</varname></term>
<listitem><para>Maximum number of clauses
we add to a single Xapian query. This only affects queries,
not indexing. In some cases, the result of term expansion can be
multiplicative, and we want to avoid eating all the memory. Default
50000.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.SNIPPETMAXPOSWALK">
<term><varname>snippetMaxPosWalk</varname></term>
<listitem><para>Maximum number of positions we walk while populating a snippet for
the result list. The default of 1,000,000 may be
insufficient for very big documents, the consequence would be snippets
with possibly meaning-altering missing words.</para></listitem></varlistentry>
</variablelist></sect3>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.PDF">
<title>Parameters for the PDF input script </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.PDFOCR">
<term><varname>pdfocr</varname></term>
<listitem><para>Attempt OCR of PDF files with no text content if both tesseract and
pdftoppm are installed. The default is off because OCR is so
very slow.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.PDFATTACH">
<term><varname>pdfattach</varname></term>
<listitem><para>Enable PDF attachment extraction by executing pdftk (if
available). This is
normally disabled, because it does slow down PDF indexing a bit even if
not one attachment is ever found.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.PDFEXTRAMETA">
<term><varname>pdfextrameta</varname></term>
<listitem><para>Extract text from selected XMP metadata tags. This
is a space-separated list of qualified XMP tag names. Each element can also
include a translation to a Recoll field name, separated by a '|'
character. If the second element is absent, the tag name is used as the
Recoll field names. You will also need to add specifications to the
'fields' file to direct processing of the extracted data.</para></listitem></varlistentry>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.PDFEXTRAMETAFIX">
<term><varname>pdfextrametafix</varname></term>
<listitem><para>Define name of XMP field editing script. This
defines the name of a script to be loaded for editing XMP field
values. The script should define a 'MetaFixer' class with a metafix()
method which will be called with the qualified tag name and value of each
selected field, for editing or erasing. A new instance is created for
each document, so that the object can keep state for, e.g. eliminating
duplicate values.</para></listitem></varlistentry>
</variablelist></sect3>
<sect3 id="RCL.INSTALL.CONFIG.RECOLLCONF.SPECLOCATIONS">
<title>Parameters set for specific locations </title><variablelist>
<varlistentry id="RCL.INSTALL.CONFIG.RECOLLCONF.MHMBOXQUIRKS">
<term><varname>mhmboxquirks</varname></term>
<listitem><para>Enable thunderbird/mozilla-seamonkey mbox format quirks Set this for the directory where the email mbox files are
stored.</para></listitem></varlistentry>
</variablelist></sect3>
</sect2>