== Upmpdcli configuration
=== Upmpdcli general parameters
[[logfilename]]
logfilename:: Log file
name. Defaults to stderr. This can also be specified as -d
logfilename.
[[loglevel]]
loglevel:: Log
level. Can also be specified as -l loglevel.
[[pkgdatadir]]
pkgdatadir:: XML and other constant data storage
directory. Default: '$prefix/share/upmpcli' (e.g.:
'/usr/share/upmpdcli').
[[pidfile]]
pidfile:: Name of lock file used to store the
current process pid. Only used if the process is launched
by user root. Used by the init system, and to avoid multiple
instances. The only reason to change the value is if you actually want to
have several instances running (also change cachedir in this
case).
=== UPnP network parameters
[[upnpiface]]
upnpiface:: Network interface to
use for UPnP. libupnp/pupnp only supports communicating on
a single interface and will use the first found, this allows forcing the
use of another interface.
[[upnpip]]
upnpip:: IP address to use for UPnP,
alternative to using an interface name.
[[upnpport]]
upnpport:: Port number
used for UPnP. libupnp/pupnp defaults to using the first
free port after 49152. Note that clients do not need to know about the
value, which is automatically discovered.
=== Media Renderer parameters
[[friendlyname]]
friendlyname:: "Friendly Name" for the
UPnP Media Renderer. This will be displayed by most Control
Points to identify the Renderer. Some OpenHome Control Points may display
the 'ohproductroom' value instead.
[[upnpav]]
upnpav:: Enable UPnP AV services
(0/1). This is set by default, but it may useful to switch
it off with some OpenHome Control Points which are too easily confused by
the presence of UPnP AV services.
[[openhome]]
openhome:: Enable OpenHome services
(0/1). This defaults to 1, as OpenHome queuing is superior
for most usages. There should be little reason to turn it
off.
[[lumincompat]]
lumincompat:: For upmpdcli
version 1.3: enable Lumin compatibility mode (lose ohcredentials)
(0/1). For some unknown reason, Lumin 1.10 can't discover
upmpdcli when the OpenHome Credentials service is enabled. Setting this
allows upmpdcli to work with Lumin, at the cost of losing the use of the
Credentials service (normally used for logging in to Qobuz or Tidal inside
Kazoo).
[[saveohcredentials]]
saveohcredentials:: Save the streaming
services login parameters to disk. This allows sharing the
password with the upmpdcli media server streaming service proxy, if you
are also using it. Avoids having to enter the password in the regular
configuration file. Depending on your situation, you may see this as a
security risk. The default is true, because I don't see this as a real
issue in the general case.
[[opensslcmd]]
opensslcmd:: Path to the openssl command The OHCredentials service needs openssl 1.1.x or newer.
Path to the openssl command to use if the system one (in /usr/bin) is too
old. Not set by default.
[[iconpath]]
iconpath:: Path to the Renderer icon. The image will be displayed by Control Points which support
it. The UPnP protocol has provisions for a renderer to send the URL to a
descriptive icon as part of the device description. Due to current (and
probably permanent) *upmpdcli* limitations, the image file *must* be a
64x64 32 bits-per-pixel png file. Default: '$pkgdatadir/icon.png'.
The icon will only be read once, when upmpdcli starts
up.
[[cachedir]]
cachedir:: Directory used to store cached
data Only used for the OpenHome queue metadata for now.
The default value is ~/.cache/upmpdcli for normal users or
/var/cache/upmpdcli when upmpdcli is started as root.
[[presentationhtml]]
presentationhtml:: Path to the presentation HTML
document You can change it to replace the default
presentation page. The page will only be read once, when upmpdcli starts
up. It can't presently be used for status updates (but I guess that you
could put a redirect in there, to something more dynamic served by a real
HTTP server). Default: '$pkgdatadir/presentation.html'.
=== MPD parameters
[[mpdhost]]
mpdhost:: Host MPD runs on. Defaults to localhost. This can also be specified as -h
host
[[mpdport]]
mpdport:: IP port used by
MPD Can also be specified as -p port. Defaults to the
normal MPD port, 6600
[[mpdpassword]]
mpdpassword:: MPD
password. Password for connecting to MPD (only necessary
if password access is enabled in the MPD configuration
file).
[[ownqueue]]
ownqueue:: Set if we own the MPD
queue. If this is set (on by default), we own the MPD
queue and will fearlessly clear it. Can also be specified as -q
0|1.
=== Audio control hooks
[[onstart]]
onstart:: Command to run when playback is
about to begin. Specify the full path to the program,
e.g. /usr/bin/logger.
[[onplay]]
onplay:: Command to run when MPD state
switches to "PLAY". Specify the full path to the program,
e.g. /usr/bin/logger.
[[onpause]]
onpause:: Command to run when MPD state
switches to "PAUSE". Specify the full path to the program,
e.g. /usr/bin/logger.
[[onstop]]
onstop:: Command to run when MPD state switches to
"STOP". Specify the full path to the program,
e.g. /usr/bin/logger.
[[onstandby]]
onstandby:: Command to run when the setstandby
action is called. Specify the full path to the program. It
is called with one 0/1 argument to change the standby state (1 for activating
standby), and with no argument to query the state. In all cases, it should
print the standby state (0/1) to stdout before exiting.
[[externalvolumecontrol]]
externalvolumecontrol:: Use external command
to manage the the sound volume (0/1). This is used in the
case where MPD is unable to control the volume, but some other command
can, for example if you have an external amp on which it is possible to
set and read the volume through scripts. If set, the calls to MPD to set
and read the volume will be replaced by executions of 'onvolumechange'
and 'getexternalvolume'
[[getexternalvolume]]
getexternalvolume:: Command to run for reading
the sound volume. The command should write a 0-100 numeric
value to stdout.
[[onvolumechange]]
onvolumechange:: Command to run to set the
volume. Used when 'externalvolumecontrol' is set.
Specify the full path to the program, which is called with the volume as
the first argument, e.g. /some/script 85.
=== OpenHome parameters
[[ohproductroom]]
ohproductroom:: The name of the room where
the Product is located. Set to ���Main Room��� by default,
displayed in place of the "friendly name" by some control points.
ProductRoom is used to group the Product with other related Products in
the same physical room (e.g. a source with a pre-amp). Products which are
physically linked must always share the same ProductRoom
name.
[[radiolist]]
radiolist:: Path to an external file with radio
definitions. Radio stations can be defined at the end of
the main file, or in an external file (or both). Using an external file
can ease distribution to multiple machines. Either way, each radio
station is defined as a section with a name beginning with 'radio',
containing a mandatory URL parameter, and optional values. The part of
the name after 'radio' will be the displayed radio name (as album title).
- artUrl: an optional static radio icon URL.
- artScript: an optional script to retrieve an image for the current title
- metaScript: an optional script to retrieve metadata for the current
title.
- preferScript: decide if values from script should override icy metadata
See the xref:radio-definitions[section about radio station definitions]
for details about the scripts.
Example:
----
[radio My Radio]
url = http://some.host/some/path.pls
artUrl = http://some.host/icon/path.png
artScript = /path/to/script/dynamic-art-getter
metaScript = /path/to/script/metadata-getter
preferScript = 1
----
[[ohmanufacturername]]
ohmanufacturername:: Manufacturer
name.
[[ohmanufacturerinfo]]
ohmanufacturerinfo:: Manufacturer
information.
[[ohmanufacturerurl]]
ohmanufacturerurl:: URL for manufacturer
web site.
[[ohmanufacturerimageuri]]
ohmanufacturerimageuri:: Uri for
manufacturer���s logo.
[[ohmodelname]]
ohmodelname:: Model name.
[[ohmodelinfo]]
ohmodelinfo:: Model information.
[[ohmodelurl]]
ohmodelurl:: URL for model web
site.
[[ohmodelimageuri]]
ohmodelimageuri:: Uri for model���s
icon.
[[ohproductname]]
ohproductname:: User-visible product
name. By default this is set to ModelName.
[[ohproductinfo]]
ohproductinfo:: Product information.
[[ohproducturl]]
ohproducturl:: URL for product web
site. This may be the UPnP presentation page.
[[ohproductimageuri]]
ohproductimageuri:: Uri for product
image.
[[ohmetapersist]]
ohmetapersist:: Save queue
metadata to disk (0/1). This allows persistence of the
metadata information across restarts, the default is 1, and there is no
reason to turn it off.
[[ohmetasleep]]
ohmetasleep:: Mimimum
interval (Seconds) between two cache saves. Increasing this
may improve playlist load speed on a slow device. The default is to start
a new save as soon as the previous one is done (if the list changed again
inbetween).
=== Media Server general parameters
[[msfriendlyname]]
msfriendlyname:: Friendly name for the
Media Server (if enabled). The default is to append
"-mediaserver" to the friendlyname value.
[[plgmicrohttpport]]
plgmicrohttpport:: IP
port for the tidal/qobuz/gmusic local HTTP service. The
URLs for tracks streamed from these services point to a local microhttpd
server running on this port (it uses redirection to the actual service
URL when actually streaming). The default is 49149.
[[plgproxymethod]]
plgproxymethod:: Decide if we proxy (copy: fetch/serve), or redirect the streaming
services streams. Using redirect is much more efficient,
but the proxy has a facility to retry when a stream is dropped by the
service, which seems to happen esp. with Qobuz.
=== Tidal streaming service parameters
[[tidaluser]]
tidaluser:: Tidal user name. Your Tidal login name.
[[tidalpass]]
tidalpass:: Tidal password. The password for your Tidal account.
[[tidalquality]]
tidalquality:: Tidal stream quality. 'low' and 'high' are aac
streams. 'lossless' is FLAC and will only work if your subscription
allows it.
=== Qobuz streaming service parameters
[[qobuzuser]]
qobuzuser:: Qobuz user name. Your Qobuz login name.
[[qobuzpass]]
qobuzpass:: Qobuz password. The password for your Qobuz account.
[[qobuzformatid]]
qobuzformatid:: Qobuz stream quality. 5 for mp3/320, 7 for FLAC if
your subscription allows it.
=== Google Music streaming service parameters
[[gmusicuser]]
gmusicuser:: Google Music user name. Your Google Music login name (probably a gmail address).
[[gmusicpass]]
gmusicpass:: Google Music password. The password for your Google Music account.
[[gmusicquality]]
gmusicquality:: Google Music stream quality. 'hi' for mp3/320, 'med'
for mp3/160, 'low' for mp3/128.
[[gmusicdeviceid]]
gmusicdeviceid:: Google Music device
id. Your system MAC address will be used by default, but
it seems that this does not work any more and that an Android deviceid is
needed. upmpdcli will try to get one from the list of registered
devices. If this does not work, you will need to set the gmusicdeviceid
value to the device ID from a phone or tablet on which you also use
Google Play Music (look up "Android deviceid" for help).
=== Spotify streaming service parameters
[[spotifyuser]]
spotifyuser:: Spotify user name. Your Spotify login name.
[[spotifypass]]
spotifypass:: Spotify password. The password for your Spotify account.
=== Local Media Server parameters
[[uprcluser]]
uprcluser:: Bogus user name variable. Used for consistency with other Media Server plugins to decide if
the service should be started (so, do set it if you want a Media Server).
[[uprclmediadirs]]
uprclmediadirs:: Media
directories This is a space-separated list of directories
to explore for music files. This is used directly as the recoll "topdirs"
value, so you can use double-quote quoting for paths with embedded
spaces.
[[uprcltitle]]
uprcltitle:: Plugin Title. This
will be displayed as the plugin entry in the Media Server root
directory.
[[uprclhostport]]
uprclhostport:: HTTP host and port for
serving media files The Media Server HTTP server will run
on this address and port, which will also be inserted on the URLs we
produce. If the variable is not set, we will use port 9090 and the first
non-loopback ipv4 address in "ip addr" output, which may be right or
not. Example: 192.168.1.1:9090
[[uprclpaths]]
uprclpaths:: Path translations. Translations from real paths to ones relative to the HTTP server
doc tree. If this is not set, uprcl will use a null translation for each
of the uprclmediadirs entries.
[[uprclconfdir]]
uprclconfdir:: Recoll index
directory This is usually not defined and defaults to
/var/cache/upmpdcli/uprcl. The name is a bit misleading because there is
no real configuration data in there: it's all programmatically
generated from actual configuration found elsewhere.
[[uprclautostart]]
uprclautostart:: Initialize uprcl as soon as
upmpdcli starts This is useful because uprcl initialization
can take quite some time so it is better not to wait for the first
access. The general default is false for the autostart variables, so this
needs to be explicitely set to true.
=== Songcast Receiver parameters
[[sclogfilename]]
sclogfilename:: Log file name for sc2mpd (default
stderr) The value *must not* be the same as the one used
for upmpdcli (except if empty).
[[scloglevel]]
scloglevel:: Log verbosity for
sc2mpd.
[[scplaymethod]]
scplaymethod:: sc2mpd
play method (mpd/alsa). With this set as 'alsa', sc2mpd
will send the audio directly to the sound driver, which is the only way
to really avoid skips and control the synchronization in multi-room
setups. *For 'alsa', make sure that user upmpdcli has permission to
access the audio devices !*
[[schttpport]]
schttpport:: Port
used by sc2mpd for MPD to connect to. Used only for
scplaymethod=mpd. sc2mpd only accepts connections from
localhost.
[[scalsadevice]]
scalsadevice:: Alsa device used by sc2mpd
for playing audio. Only used for scplaymethod=alsa. Use
'aplay -L' to see the possible values.
[[sccvttype]]
sccvttype:: sc2mpd resampling method.
Only used for scplaymethod=alsa. sc2mpd uses libsamplerate. The default
method is SRC_SINC_FASTEST and a Rasberry Pi 1 is fast enough to use it.
Possible values: SRC_SINC_BEST_QUALITY, SRC_SINC_MEDIUM_QUALITY,
SRC_SINC_FASTEST, SRC_ZERO_ORDER_HOLD, SRC_LINEAR. See the libsamplerate
documentation for descriptions. Anything above SRC_SINC_FASTEST needs a
serious CPU. BEST_QUALITY uses approx 25% cpu on a core i7
4770T. Obviously too much, actually might not be sustainable (it's almost
100% of 1 cpu). MEDIUM_QUALITY is around 10% on the same machine,
FASTEST is 4-5%. Given that this is measured for the full process, probably
a couple % for the conversion in fact. NONE will turn resampling off:
minimum CPU and best quality, but guaranteed glitches from time
to time, depending on the clocks skew.
[[sc2mpd]]
sc2mpd:: Path to
sc2mpd. Only useful if it is not in /usr/bin and the
location is not in the $PATH for the init scripts.
[[screceiverstatefile]]
screceiverstatefile:: Path to a screceiver
state file. If set, the sender uri and metadata will be read
from the file when initializing the Songcast Receiver service and written to
the file when a Sender is set for the service. Useful for preserving the
sender information between restarts.
=== Songcast Sender parameters
[[scstreamcodec]]
scstreamcodec:: !!Standard Songcast receivers only support PCM!! Codec to use for
the network stream. Set to empty or PCM to support
foreign receivers. Or use FLAC or OPUS for lower network
load.
[[scsenderpath]]
scsenderpath:: Path to starter script This is normally scmakempdsender which starts the auxiliary mpd
and the sender process. Empty and searched in the PATH by
default.
[[scstreamscaled]]
scstreamscaled:: Scale the
Songcast stream. If set, MPD software volume control will
be applied to the stream. True by default: using a Control Point to set
the volume on the upmpdcli instance which started the Sender affects the
volume for all Receivers.
[[scsendermpdport]]
scsendermpdport:: localhost port to be used by the auxiliary mpd.
[[scripts_dir]]
scripts_dir:: External sources script
directory. Location for the scripts used to set up
additional external sources. See the Songcast Sender support
documentation page.
[[scscriptgracesecs]]
scscriptgracesecs:: Grace period to wait for
a script process to exit before it is forcely killed. In seconds. Default 2 S.